Kärcher BD 40/12 C, Manual

Page: 24 / 374

– 9
 Reattach the wastewater tank to the ap-
pliance.
 Conect the suction hose with the waste-
water reservoir.
몇
Warning
Charge the battery before commissioning
the machine.

Danger
Risk of injury. Before carrying out any tasks
on the device, switch off the button for
brush operations and suction turbine and
pull out the charger plug.
몇
Warning
Risk of damage to the appliance on ac-
count of water leakage. Drain out dirt water
and the remaining free water before work-
ing at the machine.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
The battery status indicator shows the fol-
lowing faults:
Faults
Faults with display
Fault Remedy
X 1 Power consumption of suction tur-
bine is too high Turn off the switch for the brush op-
eration; wait briefly and switch it
back on. If the fault recurs, call cus-
tomer service.
X 1 Power consumption the brush drive
is too high
X 1 Suction turbine cable break.
X 1 No disc brush inserted in cleaning
head.
Power consumption of the brush
drive is too low.
Brush drivee cable break.
1 = lights up, X = blinks
Different segments of the battery status indicators are
blinking.
Turn off the switch for the brush op-
eration; release the handle switch
and switch the brush drive switch
back on.
24 EN