25
Maintenance
Service Schedule
Maintenance
Daily
Weekly
Quarterly
Check machine for cord damage.
*
Check recovery dome and gasket for damage and cleanliness.
*
Check brush - should be clean with no lint or strings attached.
*
Inspect vacuum shoe for blockage. Remove fibers or debris by flushing the
vacuum shoe under a faucet; separating the vacuum shoe in half for larger
debris.
*
Check hoses for wear, blockages, or damage.
*
Check handles, switches, and knobs for damage.
*
Check vacuum motor intake filter and clean.
*
Run one gallon of water through system.
*
Clean out recovery tank and check float valve to make sure it moves freely.
*
Clean out solution tank and remove and clean vacuum intake screen.
*
Clean outside of all tanks and check for damage.
*
Run vacuum motor for at least one minute to allow motor to dry.
*
Store with dome off tank to allow the tank to dry.
*
Clean off any debris from rotary encoder and magnet holder
*
Check all bearings for noise
*
Check all gaskets for wear and leakage
*
Check vacuum intake screen for damage; replace if necessary.
*
Check pump pressure; observe spray pattern and check with gauge if
necessary
*
Check and clean solution screen.
*
Check belts for wear and replace as necessary.
*
Check brush for wear; ensure bristles are not damaged.
*
Check cables for fraying.
*
Check the spray bar (manifold) for damage; replace if broken or bent.
*
Check condition of vacuum shoe and frame for damage.
*
Check overall performance of machine.
*
Check vacuum motor carbon brushes.
*
8.645-740.0 Manual Operator - Admiral X/Admiral XL
Summary of Contents for Admiral X
Page 11: ...11 Notes 8 645 740 0 Manual Operator Admiral X Admiral XL...
Page 32: ...32...