background image

10

Safety

Electrical

In the USA, this machine operates on a standard 15 
amp 115V, 60 Hz, A.C. power circuit. The amp, hertz, 
and voltage are listed on the data label found on each 
machine. Using voltages above or below those 
indicated on the data label will cause serious damage 
to the motors. 

Extension Cords

If an extension cord is used, the wire size must be at 
least one size larger than the power cord on the 
machine, and must be limited to 50 feet (15.5m) in 
length.

Grounding Instructions

This appliance must be grounded. If it should 
malfunction or break down, grounding provides a path 
of least resistance for electric current to reduce the risk 
of electric shock. This appliance is equipped with a 
cord having an equipment-grounding conductor and 
grounding plug. The plug must be inserted into an 
appropriate outlet that is properly installed and 
grounded in accordance with all local codes and 
ordinances. 
This appliance is for use on a nominal 120-volt circuit, 
and has a grounded plug that looks like the plug in “Fig. 
A”. A temporary adapter that looks like the adapter in 
“Fig. C” may be used to connect this plug to a 2-pole 
receptacle as shown in “Fig. B”, if a properly grounded 
outlet is not available. The temporary adapter should 
be used only until a properly grounded outlet (Fig. A) 
can be installed by a qualified electrician. The green 
colored rigid ear, lug, or wire extending from the 
adapter must be connected to a permanent ground 
such as a properly grounded outlet box cover. 
Whenever the adapter is used, it must be held in place 
by a metal screw.

Improper connection of the equipment-
grounding conductor can result in a risk of electric 
shock. Check with a qualified electrician or service 
person if you are in doubt as to whether the outlet 
is properly grounded. Do not modify the plug 
provided with the appliance - if it will not fit the 
outlet; have a proper outlet installed by a qualified 
electrician.

Le raccordement incorrect du conducteur de terre 
d'équipement peut entraîner des risques d'électro-
cution. Vérifiez auprès d'un électricien qualifié ou 
d'un responsable de l'entretien si vous avez 
quelque doute que ce soit quant au raccordement à 
la terre de votre prise murale. Ne modifiez pas la 
fiche fournie avec l'appareil : si elle ne correspond 
pas à la prise murale, faites installer une prise 
adéquate par un électricien qualifié. Utilisez-le
uniquement sur des réceptacles protégés GFCI.

USING AN ADAPTOR

GROUNDING CONNECTION 

Note:  Adaptors are not allowed in Canada.

Outlet

Tab for Grounding

Outlet Box

FIGURE C

Grounded

FIGURE A

Adaptor

Screw

FIGURE B

Adaptor

Metal Screw

Grounded

Grounding Pin

8.645-740.0 Manual Operator - Admiral X/Admiral XL

Summary of Contents for Admiral X


































Reviews: