Kärcher 6.997-355.0, Manual

Page: 10 / 130

– 3
1 Power cord with plug
2 Socket for pump
3 Pump connection (union joint) G 1 (33.3
mm)
4 Connection to household water system
G1 (33.3 mm)
5 Indicator lamp for mains voltage
6 Indicator lamp for dry running
7 Reset switch
 Install dry run fuse directly at the pres-
sure output of the home water works
into the home water system.
 Check screws for leaks.
 Take the home water works into opera-
tion as instructed in the operating hand-
book.
 Insert the power cord of the home water
works into the socket at the dry run
fuse.
 Insert the plug of the dry run fuse into
the socket.
The dry run fuse turns the pump on for
70 seconds.
The system is now ready for use
 If the pump does not turn on automati-
cally, press button for operation.
 Open the water tap / valve of the house-
hold water system.
Dry run fuse detects water flow, power
circuit for home water works is re-
leased.
 With lack of water, such as low water
level on the pump suction side, the dry
run fuse shuts off the home water works
after 70 seconds.
 Disconnect the main plug from the
socket.

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Note:
Contaminations can accumulate and lead
to malfunctions.
 Rinse the appliance with clean water af-
ter every use.
The appliance is maintenance-free.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it (see
Specifications).
 Store the appliance in a frost free area.
Operation
Description of the Appliance
Preparing the Appliance
Operation
Finish operation
Maintenance and Care
Care
Maintenance
Storage
Storing the Appliance
10 EN