3. Remove the pump shaft seal by tapping the seal towards the
front of the oil reservoir using a suitable tool. (inset figure 24)
4. Clean pump shaft seal surface.
• To replace pump shaft seal, place seal into
oil bath housing. ( figure 23).
• Push into place.
14
SECTION 3 / OIL LEAK SOLUTIONS
C. Pump Shaft Seal
1. Unscrew nut on swash plate housing (figure 21) and remove.
2. Remove the pump shaft from the rear of the oil bath housing.
3. Turn housing over and knock out the bearing by tapping it
towards the front of the oil the reservoir using a suitable tool.
(figure 22)
C. Pump Shaft Seal
figure 21
figure 22
figure 23
figure 24
Pump 629 9/28/01 3:22 PM Page 14
www.mymowerparts.com
For Karcher Pressure Washer Parts Call 606-678-9623 or 606-561-4983
