background image

9

2200 GM

English

5.  General Information

5.1 Possible applications

– Use the unit for cleaning machines, vehicles, buil-

dings, tools, etc.

– For example, clean facades, terraces, and gar-

den implements, etc. with the high-pressure jet
only.

– For reasons of environmental protection, engines

may only be cleaned in locations equipped with
suitable oil separators.

– In the event that the unit is used at petrol stations

and in other hazardous areas, the appropriate
safety regulations must be observed.

– For the removal of stubborn dirt, we recommend

the use of the dirt blaster which is available as an
optional accessory.

5.2 Safety devices

Safety Valve/Overflow valve

The safety valve also serves as the overflow valve.
When the hand gun is closed, the valve opens and
water is returned to the suction side of the pump.

5.3 Warranty

The applicable warranty conditions in different coun-
tries are issued by the respective national distributor
of products. During the warranty period, any mal-
functions of the unit caused by a material or manu-
facturing defect will be repaired free of charge.
In the event of a warranty claim, please take the unit,
with proof of purchase, to your original dealer, or to
the nearest authorised customer service centre.

Summary of Contents for 2200 GM


















Reviews: