English
25
ularly checking that all bolts,
nuts and screws are screwed
tight.
●
Each time after using the
device, remove dirt from the cut-
ting tools using a hard brush and
apply a suitable oil for rust pro-
tection before fitting the blade
guard. The manufacturer rec-
ommends using a spray for rust
protection and oiling. Ask your
Customer Service department to
recommend a suitable spray.
You can oil the cutting tools as
described, each time before us-
ing the device.
몇
CAUTION
●
Only use acces-
sories and spare parts which are
approved by the manufacturer.
Only original accessories and
original spare parts ensure that
the appliance will run fault-free
and safely.
ATTENTION
●
Clean the prod-
uct with a soft, dry cloth each
time after use.
Note
●
Service and mainte-
nance work may only be per-
formed by suitably qualified and
specially trained personnel. We
recommend sending the product
to an authorised service centre
for repair.
●
You may only per-
form the adjustments and re-
pairs described in these
operating instructions. Contact
your authorised Customer Ser-
vice department for other re-
pairs.
Safe transport and storage
몇
WARNING
●
Switch the de-
vice off, allow it to cool down and
remove the battery pack before
storage or transportation.
몇
CAUTION
●
In order to pre-
vent accidents or injuries, you
must only transport and store
the device with the blade guard
installed and with the rechargea-
ble battery removed.
●
Risk of
injury and damage to the device.
Secure the device against
movement or falling down during
transport.
ATTENTION
●
Remove all for-
eign bodies from the device be-
fore storage or transportation.
●
Store the device in a dry, well
ventilated location out of the
reach of children. Keep the de-
vice away from corrosive sub-
stances such as garden
chemicals.
●
Do not store the
device outdoors.
Residual risks
몇
WARNING
●
Certain residual risks remain
present, even when the device
is operated in the prescribed
manner. The following dangers
can be present when using the
device:
Severe injuries through con-
tact with the cutting tools.
Keep the cutting tools away
from your body and below hip
height. Fit the blade guard
Summary of Contents for 1.444-250.0
