English
BR VS 400 *USA
9
INSTRUCTIONS FOR USE
WARNING!
The cleaner must always be in motion
during operation!
Do not work on one spot as this may
damage the floor covering!
Instructions for use
Prior to using the appliance on
delicate surfaces (PVC, carpets)
–
tilt it
–
Switch the cleaning agent feed on
–
Do not operate it until the machine
has been filled with cleaning agent.
Note:
The cleaning agent feed is effected
only if the brush drive is switched on.
Scrubbing
*
Remove loose dirt by brushing
before working with the cleaner
*
Match the amount of cleaning
agent solution on the floor covering
to the level of dirt
*
Select rotary brushes suitable for
the dirt and floor covering
Polishing
*
Polishing is carried out without
using liquid
*
The brush well must be as dry as
possible before the pad is fitted
EACH TIME AFTER USAGE
Pull out the plug
–
Pull the power cable out of the
socket
–
Disconnect the plug from the power
cable
Remove the strain-reliever
Emptying the tank
Remove the tank, empty and rinse
with water
Note:
Dispose of the cleaning agent
solution in accordance with the
relevant regulations.
Heed the instructions of the cleaning
agent's manufacturer.
Switching off the cleaner
Release the pushing handles and tip
forwards
Lift the appliance
Engage the safety device
Position the cleaner vertically
Note:
Do not leave the cleaner on the rotary
brushes
Dismantle the rotary brushes
Note:
If the machine is not positioned
vertically the rotary brushes must be
dismantled
–
Remove the tank
–
Carefully lay the cleaner down
Press down and suspend the rotary
brushes
Remove the rotary brushes from the
gearing
