background image

English

BR VS 400 *USA

7

Releasing/locking the pushing

handle

Pull the catch upwards and hold

Tip the pushing handle backwards

Tip the pushing handle forwards;

*

 

The catch locks automatically

Starting/stopping the rotary

brushes

Pull the lower lever;

*

 

Rotary brush drive ON

Release the lower lever;

*

 

Rotary brush drive OFF

Measuring out the cleaning agent

Press the upper lever;

*

 

Cleaning agent feed ON

Release the upper lever;

*

 

Cleaning agent feed OFF

Note:
The cleaning agent feed is effected
only if the brush drive is switched on.

Steering the cleaner

Turn the pushing handle to the LEFT

*

 

Machine moves to the LEFT

Turn the pushing handle to the
RIGHT

*

 

Cleaner moves to the RIGHT

Changing the rotary brushes

 

Remove the tank

 

Carefully lay the cleaner down

 

Always refit two rotary brushes of
the same type

Press down and suspend the rotary
brushes

Remove the rotary brushes from the
gearing

 

Lay down the rotary brush on the
drive side (gearing)

 

Dismantle the second rotary brush
as described

Fit on a new rotary brush with the
gearing located on the drive

 

Press the rotary brush down and
place it into the thrust bearing

 

Install the second new rotary brush
as described

 

Check that the rotary brushes are
in the correct position

 

Position the cleaner vertically

Summary of Contents for 1.139-108













Reviews: