14
Folder searching (for MP3 or MP3+G song folder only)
In USB stop mode, press the FOLDER UP (+) or FOLDER DOWN (-) button to skip to
next / previous folder.
+10 track searching
Press the +10 track button to search by advance 10 track per step if the track is far away
from menu selection.
REPEAT 1/FOLDER/ALL FUNCTION
-
During music playback, press the PLAY MODE button once, REPEAT 1 indicator
will show in the monitor, single track will be played repeatedly. Press the PLAY MODE
button twice, REPEAT FOLDER indicator
will show in the monitor, all tracks in
the folder will be played repeatedly. Press the PLAY MODE button three times,
REPEAT ALL indicator
will show in the monitor, it will repeatedly play all tracks
in the whole usb drive.
-
To clear the repeat function, press the PLAY MODE button in REPEAT ALL mode, the
REPEAT OFF indicator
will show in the monitor.
REMARKS
- If you connect your system to an MP3 player via the USB port, due to variances in MP3
encoding format, some MP3 players may not be able to play via the USB port. This is not
a malfunction of the system.
- There are numerous USB thumb drive producers in the market. Solution and format are
variable between each producer. Therefore, we do not guarantee this unit can support all
USB thumb drives from every brand.
- USB thumb drives are supported FAT 32 format, 1 GB - 64 GB maximum.
TRACKS PROGRAMMING
Up to 20 tracks can be programmed for MP3 or MP3+G files and play in any order. Before
programming, be sure the system is in stop mode.
1.
stop mode.
2. Press the PLAY MODE/PROGRAM button, “PROG SET 01: 01” will be show in color
monitor, last two digits of track number indicator are flashing to prompt for input.
3. Press the
or
button to select a desired track. Press the +10 track button if the
track is far away from menu selection. If folder selection is required, press the
(UP) or FOLDER- (DOWN) button to skip to next or previous folder.
4. Press the PROGRAM button to confirm and store the track into memory. Program
counter advance to “02” and flashing with programmed track number again.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary. When
maximum of 20 tracks have been programmed, “PROG FULL” message appears briefly
in the monitor and then “PROG” mode icon shows in the monitor steadily.
6. When all the desired tracks have been programmed, press the “PLAY/PAUSE”
button to play the tracks in assigned order.
7. Press stop button to stop playing of programmed tracks, press stop button again
to cancel programming.
1
A
D
1
A
D
Insert USB thumb drive, set the unit to USB mode. Press the STOP button if unit is not in
