10
not work normally
or the LED displays
“ - - ” or “no ”
Cable plugged into AUX IN jack.
Remove AUX IN cable
Disc is dirty.
Wipe it clean with soft cloth.
Disc is scratched or warped
Use a new disc.
A non-standard disc is inserted.
Only use discs bearing identification logos.
Lens is dirty.
Clean the optical pickup with a CD lens cleaner.
Moisture has formed inside the
CD deck.
Wait about 20 to 30 minutes to let it dry out.
Karaoke system needs to be
reset.
Disconnect the machine from power source for
about 5 minutes.
No sound through
TV home stereo
Source selection on your TV home
stereo is not set properly.
Select AUX IN as the source for your TV home
stereo.
Improper connection to stereo
system or PA.
Follow directions on ‘Audio Connection’ page for
connecting to a home stereo system.
Video cable is not connected
properly to the TV.
Connect the video cable to the VIDEO OUT of
the unit and to the TV VIDEO IN jacks.
No song lyrics
appear on the
Built-in Monitor or
External TV screen
MONITOR is off.
Turn on the built-in monitor with the MONITOR
ON/OFF button.
“Source” selector on TV is not set
to VIDEO or A/V IN
Use your TV Remote to select VIDEO or A/V
input.
TV does not have video line input.
Connect from VIDEO OUT of the unit to a RF
modulator and then to the TV cable input.
A CD+G disc is loaded but the
CD+G indicator is not lit.
Check the disc to be sure it is a CD+G.
Check disc to ensure it is clean.
Cannot sing
through the mic.
Improper mic volume control.
Adjust MIC and MASTER volume level controls
to appropriate levels.
Mic is off.
Turn on mic with the ON/OFF switch located on
the microphone.
Mic is not properly plugged in.
Insert the mic plug into either MIC 1 or MIC 2
jack of the unit properly.
SPECIFICATIONS
Built-in Monitor
:
5.5-inch B&W
Audio Output Power
:
5W (RMS)
Speaker
:
1 x 4-inch / 8 ohms
Aux In Jack
:
1 x 3.5 mm
Microphone Inputs
:
2 x 600 ohms Impedance with 6.3 mm jack
Microphone
:
1 x Dynamic Microphone
Power Source :
AC Adapter:
Input AC 120V~ 60Hz 0.5A
Output DC 12V
1.5A
