Microwave barrier
- 30 -
The receiver also has a ’Disarmed’ check-box option (only available on devices with firmware
version 3.9R or later) that permits the temporary disabling of the receiver without the need to
switch off its power supply – with the ’State’ of the output relay remaining normal. A
newly ’Disarmed’ receiver status is also indicated by the LED on the paired transmitter’s circuit
board flashing three times.
The displayed ’Demodulation frequency, kHz’ value should be between 2700 and 3000, indicating
optimal communication between the transmitter and receiver.
The displayed ’Signal’ value indicates the
actual level of the signal currently received
from the transmitter.
The displayed ’Threshold’ value indicates
the actual level of the detection threshold.
To activate the settings, click ’Apply’.
Complete the programming process.
-
click ’Finish’.
Further functions of the software
Via the ’Common’ tab:
View/modify User and Administrator profiles,
COM-port settings, and language.
Also found here is a log which can store up to
10,000 events (after which the system
automatically overwrites the oldest events).
Via the ’System’ tab:
View pertinent details about a connected
transmitter or receiver.
Via the ’Signaling’ tab:
Verify proper functioning of relay contacts and LEDs.
