Microwave barrier
- 17 -
INSTALLING MULTIPLE DETECTORS AT ONE SITE
Where several detectors are installed adjacently with the intent to prevent penetration of the
barrier at the so-called “blind zones” in the immediate vicinity of the detector units, a segment
coverage overlap of at least 11.07 ft. (3.5 m) should be established. In such a detector
configuration, detector units of the same type (transmitter unit or receiver unit) must be placed
side-by-side. Variants of such configuration are shown in
Figures 2.1
.
Figures 2.1
– Variants of configuration of adjacent overlapping segments
Figure 2.1.1
Figure 2.1.2
Figure 2.1.3
