background image

 

MINI REMOTE

 

 

5

SPECIFICATIONS 

 
TRANSMITTER 

 
Power supply  ........................................... +12V nominal, 9V to 35V transient 

 

Operating temperature - Radio ............................................   -40

˚

C to +85

˚

 
Storage temperature........................................................  -40

˚

C to +100

˚

 
Frequency .........................................................................  902-928 MHz 
 
Transmit power (ERIP)................................................................... 10 mW 
 
Vibration ............................................................................ 3G to 200Hz 
 
Shock ...........................................................................................50G 
 

 

There are no user-serviceable parts inside the Transmitter or the 
Receiver.  Return the units to the KAR-TECH for service. 
 
Note:  For operation with negative ground vehicles only. 

 
WARNING:

 

The 

KAR-TECH

 MINI REMOTE must be operated in compliance with all 

applicable safety regulations, rules, and practices.  Failure to follow 
required safety practices may result in death or serious injury. 
 
 

The information, specifications, and illustrations in this manual are those in effect at 
the time of printing. 

KAR-TECH

 reserves the right to change specifications or design at 

any time without notice. 

Summary of Contents for MNTA1 MINI REMOTE









Reviews: