CAN RANGER OPERATION
17
Next the Slow Clockwise
Swing needs to be set. Hold
the SWING Handle in the
position for slow Clockwise
Swing, and push <SET>.
The next screen will be to set
the Engine Stop Position as
described above for Clockwise
Swing. Hold the SWING
Handle in this position, and
push <SET>.
The next screen lets you
Enable or Disable the Auto
Center feature for the Swing
Actuator. Push <SET> to
toggle between ENABLE and
DISABLE. Push
→
Next menu.
The final step in calibrating
the SWING function is to save
the settings or if you don’t
want to save them, just
escape.
PUSH SET TO SAVE
USE
↑
TO QUIT
Pushing <SET> will save the
settings. Pushing
↑
will exit
the Swing Calibration and will
revert
to
the
previous
settings.
If you push <SET> the
controller will automatic move
to Telescope setup. If you
want
to
calibrate
the
Telescope function next, push
<SET>.
Repeat this procedure for the
Telescope, Winch and Boom
actuators. If enabled, also
repeat this for Boom 2 and
Telescope 2. If this is the
only actuator that requires
calibration
or
to
exit
calibration keep pressing the
right button (FWD arrow)
.
The Actuator calibration is
now complete. Make sure