CAN RANGER OPERATION
9
NOT activated, and will detect
a short IF activated. The
proportional
outputs
will
detect a no-load or short
condition WHEN activated.
BATTERY CHARGING
The transmitter is designed
with a smart battery charger.
The battery can be charged
by connecting the transmitter
to an AC wall charger or a car
charger. The red and green
LED
indicators
near
the
charging port indicate the
status of the charger: The red
LED indicates that the battery
is charging and green LED
indicates that the battery is
fully charged. A complete
charge can be achieved in
about 1 hour.
To save battery life, the
transmitter will turn off when
none of the switches or
joysticks (if equipped) is used
for period of 10 minutes. The
user must recycle power to
restore transmitter operation.
However, the transmitter will
stay on as long as the
receiver has power applied to
it.
When the battery is new, the
run-time of the transmitter
will be shorter until it has
gone
through
the
drain/charge cycle several
times. After this point, the
unit’s current drain should
allow at least 20 hours of run-
time before a recharge is
needed.