CAN RANGER OPERATION
15
enabled if the valve spring is
weak.
SWING CALIBRATION
If this is the first time
calibrating the actuators, start
with SWING SETUP and the
controller
will
walk
you
through all Enabled actuators
in turn (normally 4). Once you
have selected the actuator
you want to calibrate push
<SET>
and
follow
the
instructions on the LCD.
There are several settings for
each actuator. Each has its
own screen. Use the
←→
arrow
buttons
to
scroll
through the settings if you
want to change or look at a
specific setting. If you are
setting up a new actuator,
make sure to configure each
setting to match your crane.
In each setting screen both
the stored value and the
current actuator position are
shown on the second row of
the display.
← (x.xx)
x.xx
→
The number in parentheses is
the stored value. The other is
the current actuator position.
Push Set to store the current
position into this parameter.
The receiver will automatically
move to the next setting.
For example, if you selected
SWING, the first screen will
be for the center position.
Before pressing <SET>, move
the SWING Handle back and
forth. The displayed position,
shown in inch, should change.
If not, the wrong actuator is
connected to this connection,