32
"Click"
1/
Remove the unit from its bracket fixed to the
windscreen by pressing the plastic tab on the
support.
2/
Connect the power cable to the unit. Push
the connector in until you hear a click.
This connection must be made correctly for
the device to operate correctly.
3/
Now clip the unit back on its support (chapter
2 – step 1).
4/
Check that your unit is connected correctly.
You should see information on the screen. If not,
repeat step 2.
Use the arrows to
navigate within the
menu
Double-press
to enter a menu
STOP
Press
to leave a menu
Above a speed of 10 km/h, the buttons no longer operate.
CHAPTER 4
CONNECTING THE UNIT TO THE POWER SUPPLY
CHAPTER 5
STARTING THE UNIT
