User Information for Frontline® 500
28
www.kappler.com
Garment Material - Glove
The glove assembly is connected to the sleeve via a steel clamp/PVC ring via
mechanical screw compression�
Garment Material - Footwear
The footwear is not attached to the garment material� The protective footwear is
worn over the integral sock bootie�
Garment Material - Closure
The closure is sewn to the outside of the garment material� The edge of the zipper
is covered with the same barrier tape used on material seams�
EXHAUST VALVE TYPE AND MATERIALS
The exhaust valve type is a Draeger valve� The valve body is manufactured of
impact resistant plastic� The diaphragm is made of silicon rubber� The valves are
attached to the garment via a mechanical screw compression seal� The valves
have splash resistant covers made of the primary garment material� There are
two valves incorporated into each ensemble�
RESPIRATORY EQUIPMENT
This ensemble was tested with a Scott AV3000 face-piece with SCBA� It may,
however, be used with any SCBA certified as compliant with NFPA 1981�
