9
4.2
Connecting to power supply
Connect the USB-connector to the power supply and the mini USB-connector to the mini USB socket of the camera.
Plug the power supply plug/wall wart into a socket outlet.
Please observe the correct orientation of the power supply plug. The wide side is the top side! The LED on the topside glows
for approx. 20 seconds during the initialization of the camera, then it starts flashing. When the LED is glowing green again,
the camera is ready for operation.
Insert the SD card for operation without PC. Please use SD- or SDHC cards up to 32GB. Prior to first use, new memory cards
must be formatted on a PC. Please choose the FAT32 file system for this.
Insert the memory card into the SD-card slot until click. The gold contacts face in the direction
of the lens.
To remove the SD card, please push again lightly. The card is then unlocked and can be
removed.
4.3
Operation with network connection
Use an RJ45 network cable to connect the camera. The Juno2 camera provides an RTSP stream at the network connection
(Real Time Streaming Protocol). With an appropriate player the live stream can be displayed on a PC.
You can read out the required IP address in the OSD menu.
Example
IP address 192.168.3.125:
tsp://192.168.3.125:8557/PSIA/Streaming/channels/2?videoCodecType=H.264
