manualshive.com logo in svg

Kappa Flight Eye FE320, User And Maintenance Manual

Share
Download
Kappa Flight Eye FE320 User And Maintenance Manual Download Page 32

 

32 

 

Turning on the FE320 

The FE320 is turned on and off by plugging-in and unplugging the CEU to an external power supply. 
If the FE320 is configured to default the CSU starts streaming after power-on after 30 seconds. 
If the camera shall fulfill special applications, please contact us. 

7

 

Operation 

For the operation of the camera refer to the Flight Eye Development Kit (FDK) including: 

 

Maintenance Tool KCC X 

 

Maintenance Tool Documentation  

 

SDK X 

 

Example Code 

 

Communication ICD 

http://www.kappa.de/en/service/downloads/software-full-versions

 

 

 

Frozen Image Indication 

For the unlikely case of frozen images, the camera features a detection and indication mechanism which 
leads to a red exclamation mark in the upper left corner of the camera image. 
Note: While big parts in the horizontal center line of the image are overexposed the indication exclamation 
mark will occur from time to time even though the image is not frozen. 
 

 

Figure 7-1 

Camera FE320- Frozen Image Indication 

 

 

Summary of Contents for Flight Eye FE320














































Reviews:

No comments

Brands by name

Popular brands

Load more brands