Example: if there are 3 receivers
[receiver 1= lamp shade, receiver 2= night light, receiver 3= ceiling light ]
Receiver 1,2,3 can be control individually with transmitter button 1,2,3
Receiver 1,3 can be programmed with transmitter button 4, ( lamp shade and ceiling light
ON/OFF at same time )
Receiver 1,2,3 can also be programmed into group function ALL ON or OFF at same time into
group button (lamp shade, night light and ceiling light ON/OFF at same time )
(Above settings ‘Receiver 1’ and ‘3’ takes up 3 programmed memory and ‘Receiver 2’ only 2
program memory.
Different combinations and settings can be teamed up and controlled from transmitter)
SPECIFICATION:
Frequency: 433.92 MHz
Power: 230V~+/-10%, 50Hz
Output: 40 W / VA – 250 W / 210 VA
Transmission distance: 50 meter (open field)
Load type:
-
Incandescent lamp (high voltage 230V) and halogen lamp (high voltage 230V);
-
Electronic transformer (non-dimmable) for
halogen lamp low voltage 12V. (eg. Fig. 5)
Note:
1. When connecting with (non-dimmable) electronic transformer for low voltage 12V halogen
lamp, to calculate load, add the VA ratings of the transformers (not the wattage of the
lamps). At this moment, the load for ECMR-250 means this electronic transformer (VA) not
the lamp. (Fig. 6)
