DELETE CODE:
(Fig. 3)
Delete individually –
-
Push the self program button once, LED will blink
slowly.
-
Press selected “OFF” button on transmitter,
selected programmed memory is deleted.
-
Receiver connected lamp will blink twice for
confirmation. LED stops blinking.
-
Repeat step for re-setting.
Delete ALL memories – (Fig. 4)
-
Push the self program button till LED blinks
continuously.
-
Release and push again once.
-
Receiver connected lamp will blink twice for
confirmation.
-
All programmed memories will be deleted form receiver.
OPERATION:
On transmitter:
z
Switch “ON” function – press “ON” button once.
z
Switch “OFF” function – press “OFF” button once.
z
“DIMMING” function – press “ON” button first
time to switch on, then press a second time “ON”
button start to dim. When light reaches wanted
brightness level, press “ON” button again to stop
dimming.
** If not manual to stop dimming, after light running up/down 4 cycles, ECMR-250 will
automatically stops dimming at last selected brightness level.
** Next time lamp switched on will stay at last brightness level before switching off.
SCENE SETTING:
RECEIVER HAS 6 MEMORY SETTINGS:
* It can be programmed to switch ON at one time individually or programmed with different
combinations switching.
* This means one receiver can be programmed into max. 6 different combinations.
