A P P E N D I X B
188
188
188
188
–g[=database_name]
loads details of the location to be checked from the defined database
file.
–s[=database_name]
saves details of the location to be checked to the defined database file.
#"
If you do not specify any database name in the above command line
switches, the program will use the default database under the
checkbase
name.
-f=settings_file
loads the Inspector settings from the defined settings file.
-*
checks all files.
-@[!]=filename
checks files listed in the text file
filename
. Every line in this text file must
contain only one filename to be checked with the full path to it. If the
optional character
!
is specified in the switch,
filename
will be deleted on
completion of the task.
-@p]=filname
saves the list of modified and new files detected during the session to
the defined file.
-xd=directory_mask
excludes the directories matching the defined mask from the check.
You may specify more than one mask, but make sure to separate them
by colons.
-xf=file_mask
excludes the files matching the defined mask from the check. You may
specify more than one mask, but make sure to separate them by
colons.
-c[-]
disables the program from crossing filesystem borders.
