KAP Medical SKINGUARD Owner'S Manual Download Page 31 | Manualshive

Page: 31 / 39

KAP Medical SKINGUARD Owner'S Manual Download Page 31

SkinGuard® Series

Owner’s Manual

PN 400901 Rev. C

ECO 18-0281

Page 30

•

During this mode a series of beeps will sound every 3 minutes as a reminder that Max Inflate Mode has

been activated.

PATIENT COMFORT CONTROL LEVEL

•

Pressing the DOWN/UP arrows will decrease or increase the pressure setting. The patient comfort

pressure ranges from SOFT 6 ± 5 mmHg (0) to FIRM 32 ± 5 mmHg (9). Depending on the desired patient
comfort level, the micro-controller / sensors will set appropriate air pressure and maintain the desired
pressure in the mattress.

RECOMMENDED PRESSURE SETTINGS

o

For extra firm support during patient ingress/egress, patient wound care, patient turning, or patient

cleaning, it is recommended to set the mattress pressure to MAX INFLATE.

ADJUST SETTINGS

(SkinGuard® Turn only)

•

When in specific function menus, use the ADJUST SETTINGS arrows to change the values of your

desired settings. Follow instructions on the screen in each menu to select desired settings.

PATIENT SETUP

(SkinGuard® Turn only)

•

To set the patient’s height and weight, press the PATIENT SETUP button. In this menu, use the ADJUST
SETTINGS arrows to enter the patient’s weight and height. Use the SELECT button to accept the weight
and height values. Once set, the mattress will inflate to the recommended comfort pressure level. This is
a recommended pressure level and should be adjusted to patients desired comfort level.

MODE / SELECT

•

The Mode/Select button is used to cycle between different modes including Therapy, Pulse, Multi and

Fowler. Desired mode will appear in the display screen

TURN

(SkinGuard® Turn only)

•

To activate Turn therapy, press the TURN button. To adjust the turning cycle times and turning degrees,

follow the instructions on the screen.

o

Use the ADJUST SETTINGS arrows to adjust the cycle time for the Left side, press the MAX

INFLATE button to adjust the cycle time for the Right side, and MAX INFLATE button again to
adjust the Dwell cycle time (no rotation). Press the PAUSE button to turn off a rotation function if
desired.

«
...
29
30
31
32
33
...
»

Summary of Contents for SKINGUARD








































Reviews:

No comments