manualshive.com logo in svg

KAP Medical SKINGUARD, Owner'S Manual, Page: 30 / 39

Share
Download
KAP Medical SKINGUARD Owner'S Manual Download Page 30

                                                                                                          

SkinGuard® Series 

Owner’s Manual                                                                                       

 

 

 

              

 

    
 PN 400901 Rev. C 

                 ECO 18-0281 

Page 29 

The CPR Valve on the mattress can also be used for a CPR procedure by rotating the CPR Valve to the 
open position  
 

•

  To deflate the FOAM AIR mattress for CPR procedure, disconnect the mattress deflate connector which 

is attached to the “DEFLATE” tag from the deflate valve. If connected to a control unit, press the quick 
release buttons on the connector coupling bodies and simultaneously pull the hose from the control unit 
flange connector. 

 

PATIENT TRANSPORTATION 

 

•

  To transport a patient without removing the patient off the bed, turn off the control unit, disconnect the 

power cord from the power source and roll it up on the control unit securely. 

 
 

SKINGUARD® FLOAT CONVERTIBLE FOAM AIR MATTRESS AS A NON-POWERED MATTRESS 

SKINGUARD® Float Convertible mattress can be used as a non-powered mattress without the control unit.  
Before using the mattress connect the control unit to the mattress and inflate the mattress by setting the control 
unit comfort level to 5. Once the control unit fills the mattress and the pressure stabilizes then turn the unit off 
and disconnect the hose assembly from the mattress and control unit and store the control unit and the hose 
assembly in a storage area. 
 

SKINGUARD® FLOAT CONVERTIBLE FOAM AIR MATTRESS AS A POWERED MATTRESS 

If need arises the

 

SKINGUARD® FLOAT CONVERTIBLE foam air mattress can be converted into a powered 

mattress by simply connecting the control unit to the mattress using the hose assembly provided with the 
system.  For operating instructions in powered mode please refer to 

OPERATING INSTRUCTIONS ABOVE 

FOR SKINGUARD® FLOAT

 

 

SKINGUARD® TURN 

 

POWER     

 

 

•

  During initial power up (when power cord is plugged into the power source), the control unit will go 

through a system initialization routine for a few seconds and enter “STANDBY” (amber LED on) mode. 
 

•

  If the unit is in STANDBY mode with amber LED on, press the POWER button to turn the control unit on.   

 

•

  If the power comes on after a power outage, the control unit will go through its system initialization routine 

for few seconds and then resume the desired function. 

 

MAX INFLATE     

 

 

•

  Press the MAX INFLATE button and the unit will rapidly inflate the mattress at maximum flow.  

 

•

  The mattress will inflate to its normal size within 60 seconds (inflation time depends on the size of the 

mattress). In this mode the entire mattress will be pressurized to 35 ± 5 mmHg. 

Summary of Contents for SKINGUARD








































Reviews:

No comments