Page 22 of 23
DWG ID: 181-0104-00
Date: 2006-01-24
KML 5000
Quick Start Guide
This guide is designed as quick reference to help you get started collecting, importing, and working with
data from the KML 5000.
Part 1. Retrieve your GPS data.
Assuming the KML 5000 is installed correctly and the LED's are indicating proper operation, Then you
should have some data to retrieve.
You will need an MMC or SD media card to retrieve the stored GPS data.
Step 1.
Insert the Media card into the card slot on the front of the KML. It should click in.
The LED's on the front panel will begin to flash. DO NOT remove the media card!
When the data has been successfully transferred, the RED LED will rapidly flash
GREEN.
(
Note:
The RED LED is a “dual color” LED
)
Step 2.
Remove the media card and return to the location of your computer with Map Point and
Kantronics KML software installed.
Part 2. Import your GPS data.
IMPORTANT
you must have a territory and user already setup to view the GPS data. If a
territory and / or user does not currently exist, refer to the user manual for instructions in setting this up.
Step 1.
Ok, now that we have our data on the media card and at our location, lets import it into the
software and see where we've been. Open the KML software. Insert your media card into the
card reader on your computer.
Step 2.
With Kantronics KML software open, select FILE and OPEN. Navigate to your media card.
You will find a file named something like “0000000000112.gps”.
This is the file you will import to the KML software. Select this file and click on OPEN.
Be patient, this can take a few moments depending on the speed of your computer.