Page 17 of 23
DWG ID: 181-0104-00
Date: 2006-01-24
GENERATING USER REPORTS
There are several reports that can be generated from the imported GPS data.
The first type is a “Trip Report”.
Click on the USER menu and select REPORT. As shown in figure 5-3 data is displayed
in a spreadsheet format. Starting and ending times are displayed along with location,
distance, average speed, and maximum speed. Right click a location to edit the location
if it is not displayed correctly such as a blank entry or wrong address.
Double clicking on an entry will cause a zoom to that location on the map.
A bold line indicates that the KML 5000 has had a power-up reset. That means that
power to the KML has been disconnected and then reconnected again. This does not
erase stored GPS data.
This event is shown as an asterisk (*) in column 1 of the printed report as in figure 5-4.
Italic lines indicate “random position fixes” which occur about every 60 minutes while
the ignition is off.
This event is shown as a period (.) in column 1 of the printed report.
A red line indicates a GPS antenna fault, such as an unplugged cable.
This event is shown as an exclamation (!) in column 1 of the printed report.
In addition to printing the entire report, whole sections or even single lines can be
printed. To print a section or single line of the report: Use the Control (Ctrl) and Shift
(Shift) keys on the keyboard with the left mouse button to select the line or lines to be
printed. A Speed report can also be generated.
