6
【
6
】
ADJUSTING THE THREAD RELEASER
6666----1 Thread releaser block
1 Thread releaser block
1 Thread releaser block
1 Thread releaser block
With the thread trimmer air cylinder rod at the left
end (the air cylinder is not operating), set the
clearance between thread trimmer air cylinder
bracket A and thread releaser block B at 13mm.
Then tighten screw C.
6666----2 Thread releaser connection plate
2 Thread releaser connection plate
2 Thread releaser connection plate
2 Thread releaser connection plate
Fit thread releaser connection plate D to guide
screw E. Create a clearance between plate D and
thread releaser connection lever G.
Adjustment is made by loosening screw H.
6666----3 Thread releaser lever
3 Thread releaser lever
3 Thread releaser lever
3 Thread releaser lever
Position thread releaser lever F so that the thread
tension disk can open as fast as possible.
Then tighten screw H for thread releaser connection
lever G at the rear of the arm.
