6. Data Output
6.1 Printing Out Measurement Data (Only applicable to 6113)
6.1.1 Setting Printer Paper (Roll Paper)
6. Data Output
19
(1)
Press lightly where indicated and pull the printer
cover to open it.
(2)
Turn the power ON and press
key.
(3)
Confirm the sides of the paper - front and back. (As
shown in the illustration the inner side of the roll
paper shall be facing upwards toward you.) Insert
the leading edge of the roll paper underneath the
roller.
Roller
Roll Paper
*
Install the roll paper with the head lever
pulled down.
There is a paper
sensor here.
As shown in the left illustration, cut the roll paper diagonally making the right
edge is longer then the left. The sensor to detect the roll paper is located at the
right side of the roller. Therefore, it would be easier to set the roll paper if the
right side of the paper is slightly longer.
* Use the designated thermal paper. (TP-202L by Seiko Instruments
）
.
× × ○
How to Cut Roll Paper
