Kanmed BABYWARMER User Manual Download Page 2

Page: 2 / 16

User Manual

BW-50-070/10

Page 2 of 16

Contents

1 KANMED Baby Warmer - Quick instruction.....................................................................3

2 Safety Instructions ....................................................................................................4

3 General description ....................................................................................................5

4 Description of functions ..............................................................................................8

5 Getting ready for the baby ..........................................................................................8

6 Daily use and practical hints........................................................................................8

7 Cleaning and maintenance ..........................................................................................9

8 Alarm functions and indication................................................................................... 11

9 Trouble shooting...................................................................................................... 11

10 Safety systems available.......................................................................................... 12

11 Accessories, Spare parts and technical documentation ................................................. 13

12 Technical data ........................................................................................................ 14

13 Warranty ............................................................................................................... 15

14 Disposal ................................................................................................................ 15

NOTE: This manual is valid for all KANMED Baby Warmer of model KBW50 recognised by the blue silicone
rubber edges on the control unit.

This user manual contains important safety information and must be read carefully and shall be saved for

future reference.

KANMED Baby Warmer placed in the KANMED Baby Bed

A perfect combination

Summary of Contents for BABYWARMER

















Search results

Summary of Contents for BABYWARMER

Reviews:

Related manuals for BABYWARMER

Brands by name

Popular brands

Kanmed BABYWARMER, User Manual

Search results

Summary of Contents for BABYWARMER

Reviews:

Related manuals for BABYWARMER

Brands by name

Popular brands