Kanmed BABYBED BB100 User Manual Download Page 13

Page: 13 / 20

User Manual BB100-400 /070

Page 13 of 20

6 Systematic safety checks before use

General

Ensure that all parts are in good condition and do not show discoloring or cracks. Change
parts that are not in good condition.
Additional annual maintenance is required. See technical section

Recommended
controls
before use

Executed
by

Time
schedule

Additional information

Function of Side Walls

User

Before
every use

Make sure that they move up and
down easily and that they lock in the
upper position.

Tilting

User

Before
every use

Make sure it moves freely and lock
secure in any angle desired.

Cables and connectors

User

Every day Make sure that they are in good

condition.

Stability and integrity

User

Every day Ensure that the Bed is in good

condition and stable and that all
functions works correctly

Kanmed BabyWarmer

User

See Kanmed BabyWarmer user
manual

Wheels / brakes

User

Before
every use

7 Trouble shooting

Symptom

Possible cause

Action

The lifting column does not
move as wanted.
(not for BB300,301 and
BB400F, 401F)

No mains

Check the cables.
Check power outlet

Something obstructing the
movement

Check that nothing
blocks

Electrical connection broken
or not properly connected

Technical service

Foot Pedal faulty or cable not
connected

Technical Service

You cannot tilt the Bed
properly. It gets stuck in
utmost positions.
It does not keep the position

Control is out of order or
needs adjustment

Technical service

Something is obstructing it

Check that nothing
blocks it

Bed feels unstable

Loose screws or wheels

Technical service

Height adjustments makes
unusual noises

Technical service

Side Walls are hard to move. Not fitted correctly

Check for correct fitting
Add grease

Side Walls are stuck

Guides turned the wrong way
around

See section 5.5

Side wall are not firm, rattles Side wall guides wrongly

mounted

Mount correctly

Summary of Contents for BABYBED BB100





















Search results

Summary of Contents for BABYBED BB100

Reviews:

Related manuals for BABYBED BB100

Brands by name

Popular brands

Kanmed BABYBED BB100, User Manual

Search results

Summary of Contents for BABYBED BB100

Reviews:

Related manuals for BABYBED BB100

Brands by name

Popular brands