background image

15

4.  DEFINING COPY AND/OR COMPARE

Before performing a duplication, take a moment to define the SET COPY and SET COMPARE 

options under the SETUP menu. These options will tell the duplicator how the FULL, SMART, 

BRIEF and RESIZE modes will operate.

4.1  Set Copy Functionality

When enabled FULL, SMART, BRIEF and RESIZE modes will execute a Copy process. The SET 

COPY option is enabled by default. 

To change the SET COPY option:

1.  From the Main menu, 

hold

 the ‘SET’ button to enter the SETUP menu.

2. 

Tap

 the ‘SET’ button to navigate to the SET COPY option. It is marked with an asterisk by 

default, signifying that copy functionality is currently enabled.  

3. 

Tap

 the ‘RUN’ button to toggle whether copy functionality is enabled or disabled.

4.2  Set Compare Functionality

When enabled FULL, SMART, BRIEF and RESIZE modes will execute a Compare process, 

comparing the data between the Source and Target drives and confirming that they are identical. The 

SET COMPARE option is disabled by default. 

To change the SET COMPARE option:

1.  From the Main menu, 

hold

 the ‘SET’ button to enter the SETUP menu.

2. 

Tap 

the ‘SET’ button to navigate to the SET COMPARE option. It should not be marked by 

default, signifying that compare functionality is currently disabled.  

3. 

Tap

 the ‘RUN’ button to toggle whether the option is enabled or disabled.

4.3  Set Copy & Compare Functionality

Both the SET COPY and SET COMPARE options can be enabled at the same time. When both 

options are enabled FULL, SMART, BRIEF and RESIZE modes will execute a Copy & Compare 

process, copying the data from the Source to the Target drives and then comparing the data on all 

drives to ensure that they are identical.

Defining Copy and/or Compare

Summary of Contents for KCLONE-5HD-SATA













































Reviews: