17
3.4.1 Resetting from the Login Screen
In the event you have forgotten your password, you can use the ‘Reset to Factory Default’ function
to reset your password. This function will restore the device to the factory settings, erasing all saved
passwords and data residing on the device’s secure partition.
Caution!
Using the ‘Reset to Factory Default’ function will format and wipe all data off the secure
partition ! All personal data on the device will be lost!
To reset your Defender to the factory default:
1. Start KDM.
2. When the login screen appears, click on the
Reset
button.
3. When you are prompted to confirm the reset, click on the
Yes
button.
4. When your password and data stored on the secure partition have been erased, the following
message will appear. Click on the
OK
button to complete the reset.
The next time you run KDM, you will have to complete the Setup Wizard again before you are able to
access the secure partition. Please see section
3.3 The Setup Wizard on page 11
for instructions on
completing the Setup Wizard.
Resetting from the Login Screen
