5. Then open the “USB WinME-98-2000-XP” folder
6. Run the “TPPINST.EXE” to install drivers for
the Kanguru DataBank.
7. Choose the language that you use and click “OK”.
A dialog box appears as shown, Click “NEXT
8.
Choose “Typical” and click “NEXT”.
6.
After the needed files are copied onto your
hard drive, the installation is complete.
You can connect your Kanguru DataBank to the computer now.
After you have installed the drivers
,
double click on
My Computer
, and you will see a new 80GB drive
(if a 80GB drive was included with you unit),
plus any additional Kanguru Disks you have purchased.
A green Unplug or Eject hardware icon
will appear in system tray at the bottom of your screen.
Double click this icon and click stop before unplugging
the USB cable to prevent data loss.
Please note:
the Kanguru DataBank Hard Drives come pre-partitioned FAT32 and formatted on
Windows 98.
4.2 WINDOWS ME/2000/XP
Step1
If you are plugging the Kanguru DataBank
into your computer for the first time, the system
will detect USB2.0 Storage Device and install
the driver of
[USB Mass Storage Device ]
from system files
automatically.
Step2
Once these drivers have been installed you can
double click “My Computer” and find your Kanguru
DataBank drives there.
