manualshive.com logo in svg

Kangaroo Hillcrest ABX, Manual, Page: 60 / 74

Share
Download
Kangaroo Hillcrest ABX Manual Download Page 60

Symptom

Problem

Solutions

My Electronic Front Drive wheel 
turns, but will not center exactly. 

1. The front wheel is misaligned.
2. The centering sensor in the front 

wheel is inoperative.

1. Adjust the Centering Knob on the 

Remote Receiver.  
(See pages 23–24)

2. Return to Kangaroo for repair.

My Electronic Front Drive wheel will 
not return to center.

Steering motor timed-out.

1. Turn the Function Switch OFF  

– wait 5 seconds.

2. Return to Kangaroo for repair.

My Electronic Front Drive wheel 
chatters and moves back and forth.

The centering sensor in the front 
wheel is inoperative.

Return to Kangaroo for repair.

My X-Series runs on fast  
speed only.

Circuit board inoperative.

Return to Kangaroo for repair.

My AutoBrake does not function.

Circuit board inoperative.

Return to Kangaroo for repair.

My Motor is running but the wheels  
are not turning.

1. Transaxle gear train problem.
2. Axle pin / roll pin sheared. 

Return to Kangaroo for repair.

Summary of Contents for Hillcrest ABX











































































Reviews:

No comments