Kangaroo Hillcrest ABX, Manual

Page: 37 / 74

36
Free-wheeling
36
Free-Wheeling Mode
Free-Wheeling means that the two drive wheels on your X-Series turn freely without engaging the axle or drive train.
If you must tow your X-Series either forward or backward, ALWAYS place it in Free-Wheeling Mode first!
Gear damage will result from pulling or pushing with great force. Damage from failure to disengage the drive wheels
from the gear train is not covered by the warranty.
To position each wheel into Free-Wheeling Mode, pull the release tab on the inside of the wheel towards the tire.
(Figure 19) Slide the wheel outward slightly on the axle. Position the wheel so that the release tab is in the Free-
Wheel groove. Release the tab to allow it to lock in the proper groove. The wheel should spin freely. Hub drive pins
will no longer be engaged into the wheel’s drive holes. Now try to move the wheel outward on the axle to ensure the
release tab is locked. The wheel will NOT slide off the axle if properly positioned.
Returning Wheels to Drive Mode
While pulling the release tab, slip wheel all the way against the hub, aligning the drive pins on the hub into the drive
holes in the wheel. When the wheel is on the axle, against the hub with the drive pins engaged, release the tab. This
will allow the release tab to lock into the drive groove. The wheel should now be securely mounted on the axle.
(Figure 19)