WP-HDBASETX Wall Plate Tx
1
|
P a g e
1. Introduction
1.1
Brief Introduction
Connect, switch and extend HDMI and 1 VGA+ audio input to displays or projectors in
conference rooms, classrooms and control centers. Inputs are automatically switched
(or manually selected) to permit seamless transfer from one source to the next. Extend
signal up to 70 meters (230ft) over a single Category cable. Certified HDBaseT
technology for a complete professional installation including HD video, power, RS232
control. This device uses Power over HDBaseT (PoH) to provide the flexibility for
powering the transmitter from the receiver at the display over the same Category cable.
This product is used with HDBaseT 70M extender Receiver.
1.2
Features
▪
HDBaseT Alliance certified.
▪
Dual gang Decora form factor with matte anodized aluminum finish.
▪
Delivers full uncompressed HD video 3D and 4Kx2K (VESA resolutions up to
1920x1200@60Hz, and HDTV resolutions up to 2160p) over single Category
cable up to 70m (230ft).
▪
Supports key features of HDMI1.4 including EPG, EDID, and HDCP.
▪
Built-in scaling function to automatically match signals to display native
resolution.
▪
PoH (power over HDBaseT) allows powering from the receiver at the display end.
▪
Locking features for HDMI input connectors.
1.3
Package List
▪
1 x 4K Wallplate HDBaseT Transmitter
▪
4 x Mounting Screws
▪
1 x 2-pin Pluggable Terminal Block
▪
1 x 4-pin Pluggable Terminal Block
▪
1 x Top Cover
▪
1 x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
