WP-HDBASETX Wall Plate Tx
4
|
P a g e
3. System Connection
Usage Precautions
▪
System should be installed in a clean environment and has a prop temperature and
humidity.
▪
All the power switches, plugs, sockets and power cords should be insulated and
safe.
▪
All devices should be connected before power on.
Overview:
Installation
①
If installing in a back-box, it is recommended that the4K Wallplate HDBaseT
Transmitter be installed in a 4-5/8” square box at a minimum. The 4-5/8” square
box has sufficient space to terminate the cables with jacks behind the unit when
fully installed.
②
Run one twisted pair cable from the 4K Wallplate HDBaseT Transmitter location to
the location where the HDBaseT Receiver will be located (somewhere near the
display device). See the installation instructions for the 70M HDBaseT Receiver.
LINK
RESET
FIRMWARE
SOURCE/AUTO
POWER
VGA IN
VGA
AUDIO IN
HDMI
HDMI IN
Blu-Ray DVD
PC
Cat 5e/6A
Cat 5e/6A
Tx
Rx
HDMI OUT
HDBT IN
RS232
IR IN
IR OUT
PoC
HDBaeT Receiver
Wallplate HDBaeT Transmitter
Projector/Flat Screen Display
HDMI:
VGA:
HDBaseT:
Audio:
