3x1 Wall plate Extender & Switcher with HDMI 2.0 and USB-C
5
3. Panel Description
3.1
Front Panel
①
LINK LED:
The LED illuminates green when the transmitter is successfully
connected to the receiver by a CATx cable.
②
HDCP LED:
⚫
The LED illuminates green when the HDMI signal is transmitted with HDCP.
⚫
The LED blinks green when the HDMI signal is transmitted without HDCP.
⚫
The LED turns off when there is no HDMI signal input.
③
RESET:
Press the recessed button to reboot this unit.
④
POWER LED:
The LED illuminates red when power is applied.
⑤
IR:
Built-in IR sensor for IR learning feature or IR pass-through control.
⑥
HDMI IN 1 LED:
The LED illuminates orange when the
HDMI IN 1
port is
connected to a source device, and it will turn green once the device is selected as
input source.
⑦
HDMI IN 1:
Type-A HDMI port to connect HDMI source.
⑧
HDMI IN 2 LED:
The LED illuminates orange when the
HDMI IN 2
port is
connected to a source device, and it will turn green once the device is selected as
input source.
⑨
HDMI IN 2:
Type-A HDMI port to connect HDMI source.
LINK
RESET
FIRMWARE
USB-C IN
SOURCE/AUTO
DISPLAY ON/OFF
HDMI IN 1
HDMI IN 2
IR
5
12
13
14
1
3
2
4
10
11
7
8
6
9
