11
8
Communication Protocol &
Command Codes
Command
Types
Syst
em
Co
m
m
an
d
O
pe
rati
on
Co
m
m
an
d
/*Type;
Inquire the models information.
/%Lock;L
ock the keyboard of the control panel on the Matrix.
/%Unlock;U
nlock the keyboard of the control panel on the Matrix.
/^Version;
/: Message On;T
urn on the feedback command from the com port.
EDIDMOn.
Manually adjust the EDID with the most priority output port.
EDIDMInit.
Recover the factory default EDID data
Undo.T
o cancel the previous operation.
Demo.
Switch to the “demo” mode, 1->1, 2->2, 3->3 … and so on.
[x1]All.
Transfer signals from the input channel [x1] to all output channels
All#.
Transfer all input signals to the corresponding output channels respectively.
All$.
[x1]#.
Transfer signals from the input channel [x1] to the output channel [x1].
[x1]$.
[x1] V[x2].
Transfer the video signals from the input channel [x1] to the output
channel [x2].
[x1] V[x2],[x3],[x4]. Transfer the video signals from the input channel [x1] to the output channels
[x2], [x3] and [x4].
[x1] A[x2].
Transfer the audio signals from the input channel [x1] to the output channel
[x2].
[x1] A[x2],[x3],[x4] Transfer the audio signals from the input channel [x1] to the output
channels [x2], [x3] and [x4].
[x1] B[x2].
Transfer both the video and the audio signals from the input channel
[x1] to the output channel [x2].
Command Codes
Functions
[x1] B[x2],[x3],[x4] Transfer both the video and the audio signals from the input channel [x1]
to the output channels [x2], [x3] and [x4].
Status [x1].
Inquire the input channel to the output channel [x1].
Status.
Inquire the input channel to the output channels one by one.
Save [Y].
Save the present operation to the preset command [Y]. [Y] ranges from
0 to 9.
Recall [Y].
Recall the preset command [Y].
Clear [Y].C
lear the preset command [Y].
Communication Protocol:
Baud rate: 9600
Data bit: 8
Stop bit: 1
Parity bit: None
Format: ASCII
