KanexPro HDSC51HDBT, User Manual

Page: 15 / 41

Compact Scaler Switcher (with PoE)
11
4.1.2 Software Updates
The compact scaler switcher supports software updates via USB flash disk. The
procedure is as follows:
1) Copy the file “ MERGE_51T.bin ” to the root directory of a USB flash disk. (Make sure
the file is copied to the root directory. The “ MERGE_51T.bin ” file is
provided/authorized by our engineering department or from our website)
2) Plug the USB flash disk to the compact scaler switcher USB port on its front panel.
3) Press the “MENU” button for 7 seconds or more to update the software
automatically.
You can also press this button for 6 seconds until you see an option to update OSD,
then select “Option” à “Software Update” to enter to start the update.
4.1.3 Adjusting the Volume
*Note: You must not be in the OSD menu.
Press VOL -- to decrease line volume, VOL + to increase.
Press MIC – to decrease MIC volume, MIC + to increase.
4.1.4 OSD Menu
Press the MENU button to enter the OSD menu, and use the UP , DOWN , LEFT , RIGHT
buttons to make a selection. Press the ENTER button to confirm the selection. The
MENU button can also be used to exit a menu level by level until you are out of the OSD
menu.
4.2 Operations of IR
4.2.1 IR Remote
As IR signal can be transmitted bi-directionally between the compact scaler switcher
and the HDMI twisted pair PoE receiver, it is able to use the IR remote to control the
compact scaler switcher or HDMI source devices (via CEC function buttons).