KanexPro HDMMX88-4K Series Modular Matrix Switcher (with Audio)
It will show the detail switch information when it switch. Example: when switch 1->2, it
will feedback “AV01 to 02”.
6
、
Transfer signals from an input channel to corresponding output channel:
[x]#.
Example: “5#.” to transfer signals from the input 5 to the output 5.
7
、
Switch off an output channel: [x]$.
Example:
“5$.” to switch off the output 5.
8
、
Switch signal: [x1] B[x2].
Example: “1B2,3,5.” to transfer signal from the input 1 to the output No. 2,3,5.
9
、
Inquire the input channel to the output channel [x]: Status[x].
Example: Send
“Status2.” to inquire the input channel to the output 2.
10
、
Inquire the input channel to the output channels one by one: Status.
Example: “Status.” to inquire the input channel to the output channels one by one.
11
、
Save the present operation to the preset command [Y]: Save[Y].
Example: “Save7.” to save the present operation to the preset command No.7.
12
、
Recall the preset command [Y]: Recall[Y].
Examp
le: “Recall5.” to recall the preset command No.5.
13
、
Clear the preset command [Y]: Clear[Y].
Example: “Clear5.” to clear the preset command No.5.
14
、
EDID management command:. EDIDM[X]B[Y].
Example: “EDIDM5B3.” to enable input 3 to learn the EDID data of output 5.
15
、
Command for signal cards: USER/[Y]/[X]*****.
Example: “USER/I/7:0623%;” to set the input 7 to support YPbPr signal, the card is
plugged in the second input slot of the matrix.
Note:
If there is any empty input card or output card, and send the command
“ALL#.” It
will be taken and the result is as 1->1, 2->2, 3->3
…, but actually there is no
input/output signal at this card.
