KanexPro HDMMX88-4K Series Modular Matrix Switcher (with Audio)
2. Multi-mode transmission may include the following cases:
Single-mode optical fiber module& Multi-mode optical fiber cable
Multi-mode optical fiber module& Multi-mode optical fiber cable
3. Before using 4I-UF & 4O-UF, upgrade the front-board and backboard of MMX88A.
Seek technical assistant from our technical supporters.
2.2.12. 4I-BT & 4O-BT
4K Twisted pair card (Please check the specification from 5
.2.12
)
Support HDTV, compatible with HDBT 1.0, HDMI1.4a& HDCP1.4; Wide resolution
range from 480p~ 4kx2k, 1080p 3D compliant; Extend HDBT signal up to 70m at
1080p or 40m at 4k; Bi-directional RS232 transmission on single cable; Audio source
selectable via corresponding command; Auxiliary audio ports support stereo signal.
It also boasts embedded EDID management.
4I-BT
: input card, maximum input four HDBT signal. Input signal can pass to output
device through 4O-BT, or other kinds of output cards, need to work with HDBT
transmitters.
Note:
When matching with output cards that do not support 4kx2k, adjust the input
resolution to 1080p to enable reliable output.
4O-BT
: output card, maximum output four HDBT signal, output signals from 4I-BT, or
other kinds of input cards, need to work with HDBT receivers.
The indicators and pin layout is the same with 4I-TP & 4O-TP
’s. Refer to
2.2.9 4I-TP &
4O-TP
for detailed information.
2.2.13. AU88 Stereo Audio (MMX88A Only)
8x8 stereo audio cross point switching card. (
Please check the specification from
5.2.13
)
It supports the balanced/unbalanced audio, by different connection.
It is not a hot plug card, fixed on the chassis.
