KanexPro HDMMX88-4K Series Modular Matrix Switcher (with Audio)
No.
Pin
Function
1
N/u
Unused
2
Tx
Transmit
3
Rx
Receive
4
N/u
Unused
5
Gnd
Ground
6
N/u
Unused
7
N/u
Unused
8
N/u
Unused
9
N/u
Unused
When Modular Matrix Switcher 8x8 (with Audio) connects to the RS232 port of a
computer with control software, users can control it by that computer. To control the
switcher, users need to use RS232 control software.
4.3.2. RS232 Communication Commands
With this command system, users are able to control and operate the Modular
Matrix Switcher 8x8 (with Audio) with RS232 software remotely.
Note:
1. Please disconnect all the twisted pairs before sending command
EDIDUpgrade[X].
2. In the
commands, “[”and “]” are symbols for easy reading and do not need to be
typed in actual operation.
3
. Please remember to end the commands with the ending symbols “.” or “;”.
4. Type the command carefully, it is case-sensitive.
5. Commands pertaining to EDID only available for signal cards that support EDID
management.
6. Modular Matrix Switcher 8x8 (with Audio) boasts 6 in-built EDID data; the chart
below illustrates the detailed information:
No.
Detailed Information
1
1080p 2D 5.1CH
2
1080p 2D 2.0CH
3
720p 2D 5.1CH
4
720p 2D 2.0CH
5
4kx2k 2D 5.1CH
6
4kx2k 2D 2.0CH
Update in-built EDID data by sending command
UpgradeIntEDID[x].
.
