Voice Guidance and Message on display
Turning on
Ready for prin�ng
Now prin�ng.
Prin�ng
Paper jam
Paper jam
Prin�ng is finished
Status
Message on display
Counter measure
Paper is not set
Double feeded
Eject paper
forcibly
Paper was fed
as the paper is �lt
Paper jam
Push opera�on bu�on for
a while and start ejec�on.
Push opera�on bu�on for
a while and start ejec�on.
Push opera�on bu�on for
a while and start ejec�on.
Push opera�on bu�on for
a while and start ejec�on.
Set dedicated paper
in the paper feeder.
Finish paper ejec�on
See the list of “Sound Guidance” and “Message on Display” . And follow “Counter measure” when problem happened.
This printer has “Sound Guidanvce func�on” and Messgge on Display func�on”
Regarding sound volume adjustment, follow the step (5) in Ch.9 Printer Driver Specifica�on.
If paper is not ejected a�er
(a) If you can grab paper from
pushing bu�on, follow below step.
ejec�on side, pull it out slowly
not to tear.
(b) If you s�ll cannot pull out, call
the service center.
Ready to print.
Power switch turned on.
Finished prin�ng.
Paper empty.
Sound Guidance
Set paper and press
the opera�on bu�on.
Paper has not reached the
transport section. Long press
the operation button, Paper will
be forced out to the output tray.
Paper is not properly transportaed.
Long Press the operation button,
Paper will be forced out to output
tray.
Papers overlapping.
Long Press the operation button,
Paper will be forced out to
the output tray.
Paper jammed.
Long Press the operation button
, Paper will be forced out to
the output tray.
Paper Force to output
tray has started.
Paper Force to output
tray has completed
Paper remains in the
transport sec�on.
Turn off the power and
remove the paper in the
input and output tray.
Opera�on Manual
Chap.10
Summary of Contents for TactPlus.
Page 1: ...user manual...