How to connect with Wired LAN
* For connec�ng with USB cable, follow the step “ch3 How to connect” .
【caution】
(1) Open Easytac�x folder,
and click “EasyTac�x Navigator”
A�er few seconds, the answer will be returned
that connec�on was successful or not.
if failed, contact to network administrator.
■limitation of interface
Please connect with one interface from Wired LAN/ Wi-Fi/USB interface.
the printer is not supported mul� interface connec�on.
(2) Select “ Wired LAN” from the menu.
●
Using DHCP
(Dynamic Host Configuraton Protocol)
●
Using IP address
click
click
click
A�er few seconds, the answer will be returned
that connec�on was successful or not.
if failed, contact to network administrator.
(3)Select “Use DHC” in “3.IP address acquisi�on method” field.
Then click “8. Connec�on(Printer IP se�ng)” .
(4) Select “Manually set sta�c IP address” in
“3.IP address acquisi�on method” field.
Then type sta�c IP address, net mask, gateway, DNS etc.
Once everything is finished, click “8.Connec�on(Printer IP se�ng”
<Prepara�on>
Install applica�on of USB printer driver(P.10) with USB mode beforehand.
And connect between printer and USB cable.
(5)Follow the step “
③Add Wi-Fi mode ” for both connection.
Opera�on Manual
Chap.5
How to connect with Wired LAN/Wi-Fi
Summary of Contents for TactPlus.
Page 1: ...user manual...