HAWK 5000 OPERATOR MANUAL
KANE INTERNATIONAL LIMITED
17
CONNECTIONS
Looking at the back of the HAWK from left to right the connections are:
Mains Power via an IEC connector
PC serial interface via a 9 pin Cannon 'D' type.
2 off pulse input via 6 pin circular DIN connectors
the phaser input
3 off current transformer inputs via 5 pin DIN connectors.
The serial interface connections are:
1
2 TX data
3 RX data
4
5 signal ground
6 RTS handshake out
7
8 CTS handshake in
The Pulse input connections are:
1 Low frequency input
2 Ground
3 High frequency input
4 +12V DC power out
5 Not connected
The current transformer input connections are:
1 AC current in
2 aux.
3 AC current return
4 +V aux.
5 -V aux.
