Kane 455, Quick Reference Manual

Page: 7 / 12

11. USING THE MENU
Select “Menu” on the rotary switch and navigate using the function buttons…
 = Scroll up  = Scroll down = Enter
MAIN MENU SUB MENU OPTIONS / COMMENTS
SETUP
SET FUEL
NAT GAS, L OIL (28/35 sec), PROPANE, BUTANE, LPG, PELLETS
(Wood)
N

C

G EfN = nett efficiency, EfG = gross efficiency, EfC = condensing efficiency
SET TIME Uses Military time. 7am = 07:00, 7pm = 19:00
SET DATE Uses DD-MM-YY format
PRESSURE
SMOOTH OFF = normal response. ON = slower (damped) response
RESOLVE LOW = normal. HIGH = displays to an extra decimal place
PS UNITS mbar, mmH
2
O, Pa, kPa, PSI, mmHg, hPa, InH
2
O
TIMES
LET-BY = Set duration of let-by test in minutes. Default = 1 minute
STABIL’N = Set duration of stabilisation in minutes. Default = 1 minute
TIGHTN’S = Set duration of tightness test in minutes. Default = 2 minute
REPORT
COMB’N Stored combustion tests, VIEW, DEL ALL or EXIT (max = 99 tests)
PRESSURE Stored pressure tests, VIEW, DEL ALL or EXIT (max = 20 tests)
TIGHTN’S Stored let-by and tightness tests, VIEW, DEL ALL or EXIT, (20 tests)
TEMP Stored differential temperature tests, VIEW, DEL ALL or EXIT (20 tests)
ROOM CO Stored room CO tests, VIEW, DEL ALL or EXIT (max = 20 tests)
SCREEN
CONTRAST Factory setting is 04
AUX
Enables users to customise the parameters on the AUX display
User can set any parameter on lines 1, 2, 3 and 4
HEADER Sets printout header, 2 lines, 20 characters per line
SERVICE
CODE Password protected for authorised service agents. Leave set to 0000.
To EXIT EACH Sub MENU select EXIT.
To EXIT the MENU move the rotary switch to any position other than “Menu”.
Any changes that have not been “entered” will be ignored.