background image

INTRODUCTION

SAFETY INFORMATION

1

Thank you for your purchase of

 K&S Basic 

products. This manual contains a brief description of safety, use 

and debugging. More information can be found on the official manufacturer’s website in the support section:

 

ks-power.de/betriebsantleitungen.

You can also go to the support section and download the full version of the manual by scanning the QR code, or on 

the website of the official importer of 

K&S Basic

 products:

 www.ks-power.de/en

.

Manufacturer reserves the right to make alterations into the generators, which may not be reflected in this manual. 

Pictures and photos of the product may vary from its actual appearance. At the end of this manual, You may find 

contact information which you are free to use in case of any issues occurrence.
All data, specified in this operation manual is the most up to date for the moment of its publishing. The current list of 

service centers you can find at the website of official importer: 

www.ks-power.de/en

.

Do not use the generator in rooms with poor ventilation or in conditions of excessive humidity. Do not place the gen-

erator in water or on moist soil. Do not expose the generator to rain, snow, as well as to direct sunlight for a long time. 

Place the generator on a flat, hard surface, away from flammable liquids/gases (at a minimum distance of 1 m). Keep 

unauthorized persons, children, and animals away from work area. Wear safety shoes and gloves.

We care about the environment, therefore, we consider it expedient to savepaper and 

We care about the environment, therefore, we consider it expedient to savepaper and 

leave in print a short description of the most important sections.

leave in print a short description of the most important sections.

Failure to follow the recommendations marked with this sign may 

lead to serious injury or death of the operator or third parties.

ATTENTION – DANGER!

Useful information while operating the machine.

IMPORTANT!

Be sure to read the full version of the manual before

getting started!

ELECTRICAL SAFETY

1.1

The device generates electricity. Follow safety precautions to 

avoid electric shock.

ATTENTION – DANGER!

Safety symbols and description of inscriptions can be found in the full electronic version.

Safety symbols and description of inscriptions can be found in the full electronic version.

During operation of the engine, the tiller allocates exhaust gases 

CO

2

 that can cause poisoning. Do not use the device in closed, 

badly ventilated areas

ATTENTION – DANGER!

The generator produces electricity that may lead to an electric shock while neglecting compliance regulations. K&S Basic 

generators were initially designed as an IT system with basic protection by insulation of hazardous live parts according 

to DIN VDE 0100-410. The generator housing is insulated from the current-carrying L and N conductors. The generator 

must be grounded in all cases, except for an IT system with an insulated neutral wire and bonding. A grounded IT sys-

tem requires the use of an insulation monitoring device. Further details regarding the use of the generator in IT and 

TN systems can be found on our website or requested from our technical support. Wires with damaged or spoiled 

insulation should be replaced. You should also replace worn, damaged or rusty contacts.

www.ks-power.de/en

   

|

    1

Summary of Contents for KSB 30i S














Reviews: